Your floors are a crucial component of the home. Given the variety of options on the market, selecting the ideal flooring for your home takes a lot of time. Fortunately, most of these floor types are simple to maintain, but cleaning them is still necessary to keep them looking good. But it is essential to clean every kind of flooring correctly. And while some types of flooring are simpler to maintain, others need special attention. However, no matter how challenging it may seem, you should maintain your flooring to have a clean and healthy home. To help you out, we gathered valuable information on how to efficiently clean different types of floors. Keep reading to learn how to keep your floors in good condition for a long time.
Most rugs can survive routine cleaning on both the front and back. But if you are in doubt, see the care label or contact the manufacturer or book professional carpet cleaning experts. Use a floor head to vacuum gently in small portions for sensitive rugs. In case of spilling, your best option is spot cleaning. Use a paper towel to blot damp spots. Do not rub them since this can cause the stain to bleed or set in. Spot cleaning with hot water and a mild detergent is better for more stubborn stains.
Carpets, especially shag carpets and fluffy rugs, are nice to walk on. However, they can be a bit more challenging to maintain, and many people often damage them by not cleaning them correctly. Therefore, to do things the right way, use a steam cleaner if you have one or can rent one. Alternatively, you can use a straight suction floor nozzle and carefully run over the carpet for routine-type cleaning. You may also take a small rug outside, hang it up, and beat it with a broom handle to remove dirt and dust. We do recommend to professional carpet cleaning every 6 months to keep them clean and sanitised and extend their life.
On wood floors, using an excessive amount of water or liquid cleanser might result in irreparable damage. And that is why you should learn how to efficiently clean different types of floors. Because wood is porous, it will absorb liquid and swell if you apply any liquid in excess. Therefore, one of the best ways to clean hardwood floors is to sweep them frequently. Use a mild cleaner made for hardwood floors to remove stains or spills. At the same time, remember that different deep cleaning options are available depending on the kind of wood and finish. So look closely at the label of the products you buy.
However, if you purchased a new home and want to make it spotless before you move in, ask the previous owner for cleaning tips. They should know the hardwood floor type the house has and how to clean it without damaging it.
The most uncomplicated flooring to keep clean is ceramic or porcelain. The only thing you need to do to clean up a spill or stain on the floor is to wipe it with a damp mop. In addition, once in a while, you can clean the floor using a neutral floor cleaner. All mops are effective, but the string mop is still the best. And if you want to make your flooring look new, ensure you clean the grout lines between the tiles. Additionally, avoid using abrasive cleanser on the floor, as this may harm the glaze.
You still need to treat your laminate as a laminate, even if it looks like hardwood or natural stone. The good news is that laminate floors are often resistant to damage. After all, the boards are built with layers to make them resistant and easy to keep them looking brand-new for years. Nevertheless, it’s essential to prevent water from entering underneath the planks. Therefore, dry mop or vacuum the floor while setting it to tile mode to raise the beater bar. When required, use a moist mop to spot-clean. But remember: never polish laminate flooring. If a plank has dents or scratches, it’s better to replace it.
You should clean linoleum floors every week or so. For the best results, mix a light detergent with warm or hot water, moisten a mop with the mixture and work in sections. Because standing water can harm linoleum, make sure the mop is moist but not dripping wet. After mopping, change the cleaning solution to cold water. Rinse the mop, then mop the floors with water alone to remove any soapy residue. Finally, dry your freshly cleaned floors with a towel or cleaning cloth.
Cleaning tile floors is easy, and you must do this chore weekly. All you need is a clean washcloth and a vacuum. Sweep or vacuum away any dry material, such as grit, dirt, sand, or crumbs. Then, use the washcloth to clean up any spillage. By putting area rugs or mats in heavy traffic areas, you may also assist in preventing tile floors from becoming dirty too quickly. That will also prevent dirt from being dragged across the tile and settling on the carpets.
However, do take the time to check the grout between the tiles to make sure nothing is trapped there. Use a steam cleaner on the tile and grout to thoroughly clean the surface.
You can find vinyl flooring in a wide variety, but vinyl planks and tiles are the most popular. In addition, these floors are effortless to clean and maintain. As with ceramic or porcelain flooring, you can wipe up spills on the floor using a damp mop. In addition, to prevent the flooring from being damaged, use a neutral floor cleanser rather than an abrasive one. If you see stains on the floor after mopping, clean it again using a vinegar-and-water solution. However, remember that pouring water straight onto the floor will cause the adhesive to become loose.
There are many floor types and many cleaning options. However, you must match each flooring with its perfect cleaning method. But once you learn how to efficiently clean different types of floors, your cleaning task will become much more manageable.